THE MINI MELTDOWN MACHINE

CRYBABY WAX THE MINI MELTDOWN MACHINE is a compact yet powerful wax warmer that reduces counter chaos. This little game-changer is only slightly larger than a golf ball, but packs a serious punch. Need to take your wax warmer on the road? No problem! Powered by USB-C, this pocket-sized powerhouse works anywhere you can plug in - even in your car! It melts just the right amount of wax - 0.5 oz., to be exact - for smaller areas like eyebrows or upper lips. No waste, no mess, no stress. Portable, powerful, and ready to roll, your wax routine just got a serious upgrade. Silicone liner included.

Step 1: Waxing Preparation
Remove lid of the wax heater and pour a small amount of wax into the silicone pot.

Step 2: Heat the Wax
Connect the USB cord to a power source and the device will start heating automatically (indicated by a red light).
In about 15 minutes, the light will turn green.
This indicates it is ready to use.
Stir the wax using a wax applicator.
Perform a small patch test on the inner wrist to check the temperature and make sure it is not too hot.

Step 3: Wax Removal
Apply the wax to the area with unwanted hair in the direction of hair growth. Paint an even layer of wax that is not too thick and wait for several seconds for the wax to harden.
Hold the skin taut with one hand and quickly remove the wax in the opposite direction of hair growth using the other hand.
Repeat above steps as needed.

Step 4: Storage
After use, unplug the USB from power source and allow device to cool down.
Clear the residual wax from the silicone pot before storage.


Warmer Tips:
For best performance, use with adapter plug rated at 5V, 2A or higher.
If the current is below 1.5A, the wax melting time may be extended.
When the heater indicator turns green and a small amount of wax is not fully melted, this is normal.
Stir wax with a wooden applicator before use.